Many people will find that when using woodworking engraving machines, it can effectively extend the service life, and it has already spread across different industries, which is recognized as a new type of product. At present, the service life of woodworking engraving machines is basically more than 100,000 hours. In this case, because the conversion rate is relatively high, the operating cost can be reduced, but the service life is not completely fixed. Carry out maintenance.
Under normal circumstances, woodworking engraving machine is used, and maintenance once a week can effectively bring about good effects. Especially in workshops with harsh environment, maintenance and cleaning need to be paid attention to, which can effectively extend the life of use. At this time, it should also Know how to perform maintenance and maintenance. Generally, when using a laser marking machine, it is also necessary to ensure the circulation of surrounding air, which can effectively avoid the problem of overheating of the equipment. At the same time, the machine should not be moved, otherwise it will affect the life of the equipment.
If you find that the woodworking engraving machine is malfunctioning, you also need to cut off the power as soon as possible. If the voltage is unstable or the current is too large, the equipment may be affected. If the CNC engraving machine is not to be used for a long time, it is necessary to cut off the power immediately. At the same time, a wooden board should be placed underneath to prevent flooding when the rainy season arrives. In short, pay attention to maintenance, which is also a key detail.