After the stone cnc router machine is affected by the humid environment, the motor spindle will rust. Long-term rusting is detrimental to the maintenance of the stone cnc router machine, affects the use of the stone cnc router machine, and shortens the service life of the engraving machine. How to solve the rust problem of stone cnc router machine?

　　Since the motor spindle rusts will cause such a problem, is there any way to solve the rust of the stone cnc router machine motor spindle? The answer is yes.

　　 provides you with two solutions:

       Physical method of rust removal: Rely on manual knocking, shoveling, scraping, brushing, sand or flexible frustration to remove surface rust, scale, etc. This is a radical rust removal method for painters. You can also use a pointed hammer or a wire brush. , Emery cloth, broken saw blades and other tools are also the easiest way.

Second, chemical method of rust removal: You can use WD-40 cleaning lubricant, spray evenly on the motor, and then use a cotton cloth to wipe off the rust on the stone cnc router machine. If the rust is severe, you can do it several times. WD-40 It is non-conductive and has a good lubricating effect.

　　 After the machine is used, you must carefully check all aspects of the machine, find the problem and solve the problem in time, and do a good job in the maintenance of the stone cnc router machine. Only by doing a good job in the maintenance of the stone cnc router machine can the machine have a longer service life and produce more.

　　 It is well known that the application of stone cnc router machine in engraving is very high, and there are many patterns that can be engraved. BCAM's stone cnc router machine has professional and technical personnel to provide machine installation and commissioning. Considerate service and make you satisfied is our aim.